drop separator

Droplet separator: (accessory) mounted on the low-pressure cold side near the compressor on the suction line.

His role:

* Allow gaseous refrigerant to return to the compressor.

* return oil to the compressor.

third to allow storage of the refrigerant while the load on the chiller decreases

A liquid cooler is heavier than a gas cooler, so it sinks down.

Gaseous refrigerant returns through the suction pipe to the compressor while liquid refrigerant evaporates directed to the separator.

A droplet is in a hot environment and then it returns through the suction pipe as cold in a gas accumulation mode.

It is forbidden for liquid to enter the compressor on purpose that liquid has not been compressed and to the extent that liquid touches the compressor.

The mechanical mechanism will be destroyed.

Suitable for coolers:

R22, R407, R134a, R404A, R507, R450A, R513A, R1234ze, R448A, R449A

Characteristics:

Hermetic design

ODF copper fittings for light plumbing

Corrosion resistant epoxy powder coating

Internal opening with strainer for optimal oil return

Maximum allowable pressure 20.7 BAR (-10 °C… +65 °C) 15.5 BAR (-01℃-45℃)